Collection: Supermicro X9SCL-F Memory Upgrades

Supermicro X9SCL-F RAM Upgrade

Give your business the extra edge it deserves by upgrading your Supermicro X9SCL-F memory and experience the value of advanced hyper-threading technology. Designed with virtual processing in mind, the Supermicro X9SCL-F Server can be upgraded up to a maximum of 32 GB and is capable of utilizing 1600 MT/s modules (Note: 1866MT/s modules can be installed but will down clock to 1600MT/s).

Cloud Ninjas offers upgrade packages that work with the Supermicro X9SCL-F Server. To find the best memory upgrade package for the Supermicro X9SCL-F Server, choose the desired RAM size and speed from the list below. For lower end systems we would recommend a 16GB 1333MT/s kit. For higher end use we would suggest a 32GB 1600MT/s kit.

Supermicro X9SCL-F Memory Quick Specs

# of Slots: 4 DIMMs
Max # DIMMS: 4 x 8GB
Max GB: 32GB
Max Speed: 1600MT/s (1866MT/s will work but will downclock to 1600MT/s)
DIMMS Supported: 1GB 2GB 4GB 8GB

Contact Cloud Ninjas today to help compare your options.
View the Supermicro X9SCL-F Quick Reference.

Supermicro X9SCL-F Memory Configuration Guide

The Supermicro X9SCL-F is a single CPU system with two memory channels each packing two DDR3 DIMM slots. This system is only compatible with ECC UDIMMs and will support Standard Voltage (1.5v) and Low Voltage (1.35v) modules. You cannot mix different memory types. It is never recommended to install modules operating at different speeds, We only offer matching kits to ensure your configuration is preforming at its maximum capability while maintaining extreme reliability.

Cloud Ninjas' Supermicro X9SCL-F Memory Upgrade Tips

The Supermicro X9SCL-F has four DDR3 DIMM slots
Only supports ECC UDIMMS
Speeds Supported: 1066MT/s, 1333MT/s, 1600MT/s, and 1866MT/s (Note: 1866MT/s will down clock to 1600MT/s)
Voltages Supported: Standard Voltage (1.5v) and Low Voltage (1.35v)
The system supports 2GB, 4GB and 8GB ECC UDIMM.
DO NOT MIX DIFFERENT MEMORY TYPES.
Maximum configuration of 32GB ECC UDIMM
The Supermicro X9SCL-F has one CPU slot that controls two memory channels, each with two DDR3 DIMM slots
Capable of using single rank, dual rank, or quad rank memory
Think Long Term! Purchase the maximum amount that your Supermicro X9SCL-F can hold and avoid wasting time and money on modules you won't be able to use if you upgrade again.
Buy Supermicro X9SCL-F server memory today from Cloud Ninjas!

Cloud Ninjas' Supermicro X9SCL-F Server Questions & Answers

What sizes can you use for the Supermicro X9SCL-F Server?
The Supermicro X9SCL-F Server can be upgraded using 2 GB, 4 GB, and 8 GB UDIMM. Get your kit at https://cloudninjas.com/.
What speeds are supported by the Supermicro X9SCL-F Server?
The Supermicro X9SCL-F Server can support 1066, 1333, or 1600 MHz based on DIMM and configuration.
What types of RAM are accepted by the Supermicro X9SCL-F Server?
The Supermicro X9SCL-F Server supports DDR3 with ECC UDIMM only.
What is ECC Registered Memory?
The Supermicro X9SCL-F Server does not support registered memory with ECC. ECC memory detects and corrects memory errors within the server environment. Registered (also called buffered) memory modules register between DRAM modules and the system's memory controller. ECC Registered Memory transfers less electrical load to your memory controller which makes it more stable and reliable.
What is Unbuffered Memory?
The Supermicro X9SCL-F Server supports unbuffered memory with ECC. Unbuffered memory is memory that has no register between your DRAM and your system’s memory controller.
What is Load Reduced Memory?
The Supermicro X9SCL-F Server does not support load reduced DIMM (LRDIMM). Load reduced DIMM is designed with a buffer chip (or chips) to replace the register to help minimize loading, the LRDIMM increases server system memory capacity and speed.
Can I mix ECC Reg with ECC unbuffered or Non-ECC memory?
The Supermicro X9SCL-F Server does not support the use of both unregistered and registered memory with ECC or the use of non-ECC memory. It is recommended to use identical memory configuration in all channels.
What is max configuration?
The Supermicro X9SCL-F Server allows the maximum configuration of 32 GB using four 8 GB dual rank DIMM. Get your kit at https://cloudninjas.com/.
How many memory channels per CPU?
The Supermicro X9SCL-F Server has 2 channels which allow two UDIMM per channel, with a total of 4 slots which are numbered 1 through 4.
How do I identify the start of the memory channel?
The Supermicro X9SCL-F Server requires that DIMM sockets only be populated based on the exact number of slots i.e., 1 through 4. The white DIMM slot is the first slot of each channel. An arrow exists on the motherboard that indicates the location of the processor.
Where can I order memory for my server?
Order your memory at https://cloudninjas.com/ by finding and selecting the memory package that is right for you.
How soon will my RAM arrive?
Orders placed before 8 am are set for same day processing and shipping. Delivery times vary based on carrier and location.
What is the warranty on memory for the server?
Cloud Ninjas offers a one-year warranty on fully tested, refurbished memory.

Select a Speed

Select a Size

Select a Speed

Select a Size

Select a Speed

Select a Size

Select a Speed

Select a Size

Filter By

ALL PRODUCTS

All products

6 products