Increase and update your business infrastructure by upgrading the RAM memory of your Supermicro X11SSA-F server, and experience the difference in secure scalable speed and performance with Cloud Ninjas's selection.
Supermicro X11SSA-F motherboard is a single processor motherboard, with 4 DIMM slots. There are 2 memory channels, each managing 2 slots per processor.
The Supermicro X11SSA-F supports ECC Unbuffered and Non-ECC Unbuffered DDR4 memory.
Different speeds can be mixed; however the modules will function at the slowest speed installed.
The Maximum speed RAM can run on the Supermicro X11SSA-F is 2400MT/s.
Keep in mind, the CPU you choose also impacts the available speeds your RAM can run.
The total number of DIMMS for the Supermicro X11SSA-F motherboard is 4 slots.
The Supermicro X11SSA-F supports 8GB, 16GB, 32GB DDR4 ECC Unbuffered or Non-ECC Unbuffered memory.
RDIMMs, LRDIMMs or UDIMMs must not be mixed. The Supermicro X11SSA-F, does not support ECC Registered and Load-Reduced DDR4 Memory.
Buy “Supermicro X11SSA-F” memory today from Cloud Ninjas!
When purchasing new memory it is best to purchase identical memory modules to what your system already has. Your current motherboard configuration will determine the supported DIMM type and speed.
The Maximum amount of RAM the Supermicro X11SSA-F motherboard can hold is 64GB of ECC Unbuffered or 64GB of Non-ECC Unbuffered memory.
Think Long Term! Purchase the maximum amount that your Supermicro X11SSA-F can hold and avoid wasting time and money on modules you won't be able to use if you upgrade again.
The Supermicro X11SSA-F supports maximum speed of 2400MT/s.
Cloud Ninjas's Supermicro X11SSA-F Q&A
1. What sizes can you use for the Supermicro X11SSA-F motherboard? The Supermicro X11SSA-F motherboard can be upgraded using 8GB, 16GB ECC UDIMMS, and up to 16GB Non-ECC UDIMMs. Get your kit at https://cloudninjas.com/.
2. What speeds are supported by the Supermicro X11SSA-F motherboard? The Supermicro X11SSA-F motherboard can support memory modules at speeds 2400MT/s.
3. What types of RAM are accepted by the Supermicro X11SSA-F motherboard? The Supermicro X11SSA-F motherboard supports ECC Unbuffered memory and Non-ECC Unbuffered memory.
4. What is ECC Registered Memory? The Supermicro X11SSA-F motherboard does not support registered memory with ECC. ECC Registered Memory detects and corrects single-bit errors in memory using parity bits and a series of mathematical equations. In ECC Registered memory, Registers (also called buffers) sit between the memory module's address bus and the physical memory chips.
5. What is Unbuffered Memory? The Supermicro X11SSA-F motherboard does support unbuffered memory with ECC and Non-ECC. Unbuffered memory is memory that has no registers (also called buffers). Unbuffered memory can be ECC (for entry-level motherboards and workstations) or Non-ECC (for desktops and laptops).
6. What is Load Reduced Memory? The Supermicro X11SSA-F motherboard does not support load reduced DIMM (LRDIMM). ECC Load Reduced Memory detects and corrects single-bit errors in memory using parity bits and a series of mathematical equations and reduces electrical load on the system's memory controller when compared to other types of memory modules. In ECC Load Reduced memory, Registers (also called buffers) sit between the memory module's address bus and the physical memory chips. Additional registers also sit between the Memory chips and the data bus, further reducing load on the system's memory controller in comparison to ECC registered memory.
7. Can I mix ECC Reg with ECC unbuffered or Non-ECC memory? The Supermicro X11SSA-F motherboard does not support the use of both unregistered and registered memory with ECC or the use of non-ECC memory. It is recommended to use identical memory configuration in all channels.
8. What is the max configuration? The Supermicro X11SSA-F motherboard supports the standard maximum configuration of 64GB using 4x16GB ECC UDIMMs or 64GB using 4x16GB Non-ECC UDIMMs memory. Get your kit at https://cloudninjas.com/
9. How many memory channels per CPU? The Supermicro X11SSA-F motherboard has 2 channels which house 2 sockets per channel with a total of 4 sockets in the single processor configuration.
10. How do I identify the start of the memory channel? The Supermicro X11SSA-F motherboard, requires memory to be installed into the first white channel marked A1 for Processor 1, inserting in sequential order and then Processor 2 the first white channel marked B1.
11. Where can I order memory for my motherboard? Order your memory at https://cloudninjas.com/ by finding and selecting the memory package that is right for you.
12. How soon will my RAM arrive?Orders placed before 8 am are set for same day processing and shipping. Delivery times vary based on carrier and location.
13. What is the warranty on memory for the motherboard?Cloud Ninjas offers a one-year warranty on fully tested, refurbished memory.
14. Is this RAM labeled or Supermicro branded?No. The memory shipped from Cloud Ninjas is compatible with your Supermicro system. However, it will not have a Supermicro sticker. We ship major brands such as Samsung, Hynix and Micron.
Use left/right arrows to navigate the slideshow or swipe left/right if using a mobile device
Choosing a selection results in a full page refresh.
Press the space key then arrow keys to make a selection.
Filters
The total number of DIMMS for the Supermicro X11SSA-F motherboard is 4 slots.
The Supermicro X11SSA-F supports 8GB, 16GB, 32GB DDR4 ECC Unbuffered or Non-ECC Unbuffered memory.
RDIMMs, LRDIMMs or UDIMMs must not be mixed. The Supermicro X11SSA-F, does not support ECC Registered and Load-Reduced DDR4 Memory.
Buy “Supermicro X11SSA-F” memory today from Cloud Ninjas!
The Maximum amount of RAM the Supermicro X11SSA-F motherboard can hold is 64GB of ECC Unbuffered or 64GB of Non-ECC Unbuffered memory.
Think Long Term! Purchase the maximum amount that your Supermicro X11SSA-F can hold and avoid wasting time and money on modules you won't be able to use if you upgrade again.