Increase and update your business infrastructure by upgrading the RAM memory of your Supermicro X10SRL-F server, and experience the difference in secure scalable speed and performance with Cloud Ninjas's selection.
Supermicro X10SRL-F motherboard is a single processor system, with 8 DIMM slots. There is 4 memory channels, each managing 2 slots.
The Supermicro X10SRL-F supports ECC Registered or Load-Reduced.
Different speeds can be mixed; however the modules will function at the slowest speed installed.
The Maximum speed RAM can run on the Supermicro X10SRL-F is 2400MT/s using ECC Registered or Load-Reduced memory DDR4 modules. Memory speeds will vary depending on CPU generation.
Keep in mind, the CPU you choose also impacts the available speeds your RAM can run.
The total number of DIMMS for the Supermicro X10SRL-F motherboard is 8 slots.
The Supermicro X10SRL-F supports 4GB, 8GB, 16GB, 32GB ECC Registered or 32GB, 64GB Load-Reduced DDR4 memory.
RDIMMs, LRDIMMs or UDIMMs must not be mixed. The Supermicro X10SRL-F, does not support ECC Unbuffered and Non-ECC Unbuffered DDR4 Memory.
Buy “Supermicro X10SRL-F” memory today from Cloud Ninjas!
When purchasing new memory it is best to purchase identical memory modules to what your system already has. Your current server configuration will determine the supported DIMM type and speed.
The Maximum amount of RAM the Supermicro X10SRL-F motherboard can hold is 256GB ECC Registered or 512GB Load-Reduced DDR4 memory.
Think Long Term! Purchase the maximum amount that your Supermicro X10SRL-F can hold and avoid wasting time and money on modules you won't be able to use if you upgrade again.
The Supermicro X10SRL-F supports maximum speed of 2400MT/s using ECC Registered or Load-Reduced memory.
Cloud Ninjas's Supermicro X10SRL-F Q&A
1. What sizes can you use for the Supermicro X10SRL-F motherboard? The Supermicro X10SRL-F motherboard can be upgraded using 4GB, 8GB, 16GB, 32GB RDIMMs or 32GB, 64GB Load-Reduced DDR4 memory. Get your kit at https://cloudninjas.com/.
2. What speeds are supported by the Supermicro X10SRL-F motherboard? The Supermicro X10SRL-F motherboard can support memory modules at speeds 2400MT/s Registered, Load-reduced,ECC Unbuffered or non-ECC Unbuffered memory.
3. What types of RAM are accepted by the Supermicro X10SRL-F motherboard? The Supermicro X10SRL-F motherboard supports ECC Registered or Load-Reduced.
4. What is ECC Registered Memory? The Supermicro X10SRL-F motherboard does support registered memory with ECC. ECC Registered Memory detects and corrects single-bit errors in memory using parity bits and a series of mathematical equations. In ECC Registered memory, Registers (also called buffers) sit between the memory module's address bus and the physical memory chips.
5. What is Unbuffered Memory? The Supermicro X10SRL-F motherboard does not support unbuffered memory with ECC and Non-ECC. Unbuffered memory is memory that has no registers (also called buffers). Unbuffered memory can be ECC (for entry-level servers and workstations) or Non-ECC (for desktops and laptops).
6. What is Load Reduced Memory? The Supermicro X10SRL-F motherboard does support load reduced DIMM (LRDIMM). ECC Load Reduced Memory detects and corrects single-bit errors in memory using parity bits and a series of mathematical equations and reduces electrical load on the system's memory controller when compared to other types of memory modules. In ECC Load Reduced memory, Registers (also called buffers) sit between the memory module's address bus and the physical memory chips. Additional registers also sit between the Memory chips and the data bus, further reducing load on the system's memory controller in comparison to ECC registered memory.
7. Can I mix ECC Reg with ECC unbuffered or Non-ECC memory? The Supermicro X10SRL-F motherboard does not support the use of both unregistered and registered memory with ECC or the use of non-ECC memory. It is recommended to use identical memory configuration in all channels.
8. What is the max configuration? The Supermicro X10SRL-F motherboard supports the standard maximum configuration of 512GB using 8x64GB LRDIMMs memory or 256GB using 8x32GB RDIMMs. Get your kit at https://cloudninjas.com/
9. How many memory channels per CPU? The Supermicro X10SRL-F motherboard has 4 channels which house 2 sockets per channel with a total of 8
sockets in the single processor configuration.
10. How do I identify the start of the memory channel? The Supermicro X10SRL-F motherboard, requires memory to be installed into the first white channel marked A1 for Processor 1, inserting in sequential order and then Processor 2 the first white channel marked B1.
11. Where can I order memory for my server? Order your memory at https://cloudninjas.com/ by finding and selecting the memory package that is right for you.
12. How soon will my RAM arrive?Orders placed before 8 am are set for same day processing and shipping. Delivery times vary based on carrier and location.
13. What is the warranty on memory for the server?Cloud Ninjas offers a one-year warranty on fully tested, refurbished memory.
14. Is this RAM labeled or Supermicro branded?No. The memory shipped from Cloud Ninjas is compatible with your Supermicro system. However, it will not have a Supermicro sticker. We ship major brands such as Samsung, Hynix and Micron.
Use left/right arrows to navigate the slideshow or swipe left/right if using a mobile device
Choosing a selection results in a full page refresh.
Press the space key then arrow keys to make a selection.
Filters
The total number of DIMMS for the Supermicro X10SRL-F motherboard is 8 slots.
The Supermicro X10SRL-F supports 4GB, 8GB, 16GB, 32GB ECC Registered or 32GB, 64GB Load-Reduced DDR4 memory.
RDIMMs, LRDIMMs or UDIMMs must not be mixed. The Supermicro X10SRL-F, does not support ECC Unbuffered and Non-ECC Unbuffered DDR4 Memory.
Buy “Supermicro X10SRL-F” memory today from Cloud Ninjas!
The Maximum amount of RAM the Supermicro X10SRL-F motherboard can hold is 256GB ECC Registered or 512GB Load-Reduced DDR4 memory.
Think Long Term! Purchase the maximum amount that your Supermicro X10SRL-F can hold and avoid wasting time and money on modules you won't be able to use if you upgrade again.