Collection: Supermicro X10SLL-F Memory Upgrades

Supermicro X10SLL-F RAM Upgrade

Upgrading the memory to your Supermicro X10SLL-F Motherboard is the quickest and least expensive way to improve the life of your server in a matter of minutes. Easily install up to 32GB of memory to experience the the most your system is capable of offering. With speeds capable of up to 1600MT/s, your business's productivity will never lag behind. (Note:1866MT/s can be installed but will clock down to 1600MT/s)

The Supermicro X10SLL-F Motherboard supports a maximum of four DDR3 ECC Unbuffered. Optimize your Supermicro X10SLL-F Motherboard and make it work for you in the most powerful way by upgrading with high quality memory! Find the best RAM deal for your Supermicro X10SLL-F Motherboard by choosing your desired RAM size from the list below. For lower end applications, we would recommend a 16GB kit whereas a higher end application would be recommended a 32GB kit. No matter the application we always recommend using an ECC kit for its unrivaled stability.

Supermicro X10SLL-F Memory Quick Specs

# of Slots: 4 DIMMs
Max # DIMMS: 4 x 8GB
Max Size UDIMM: 32GB
Max Speed: 1600 MT/s (1866 will clock down to 1600)
DIMMS Supported: 1GB 2GB 4GB 8GB

Contact Cloud Ninjas today to help compare your options!
View the Supermicro X10SLL-F Quick Reference.

Supermicro X10SLL-F Memory Configuration Guide

The Supermicro X10SLL-F is a Single Processor system with 4 DIMM slots. There are two memory channels each managing two DIMM slots. This system can utilize up to four 8GB ECC UDIMMs for a maximum capacity of 32GB. Standard Voltage (1.5v) and Low Voltage (1.35v) modules are supported. You should never mix modules with different speeds. We recommend installing DIMMs with matching speeds for the best performance and reliability.

Cloud Ninjas' Supermicro X10SLL-F Workstation Memory Upgrade Tips

There are a total of four DDR3 DIMM slots on the Supermicro X10SLL-F
Supports ECC Unbuffered modules only
Speeds Supported: 1066MHz, 1333MHz,1600MHz and 1866MHz. (Note: 1866MT/s will clock down to 1600MT/s)
The system supports 1GB, 2GB, 4GB and 8GB ECC DIMM
Voltages Supported: Standard Voltage (1.5v) and Low Voltage (1.35v)
DO NOT MIX DIFFERENT MEMORY TYPES
Maximum of 32GB ECC modules
There is one CPU with two channels each containing two DIMM slots
Supports Single Rank, Dual Rank, and Quad Rank memory
Think Long Term! Purchase the maximum amount that your Supermicro X10SLL-F can hold and avoid wasting time and money on modules you wont be able to use if you upgrade again.
Buy Supermicro X10SLL-F server memory today from Cloud Ninjas!

Cloud Ninjas' Supermicro X10SLL-F Workstation Questions & Answers

What memory sizes can you use for the Supermicro X10SLL-F?
The Supermicro X10SLL-F can be upgraded using dual rank 2 GB, 4 GB, and 8 GB ECC UDIMM. Get your upgrade kit from Cloud Ninjas.
What speeds are supported by the Supermicro X10SAE?
The Supermicro X10SAE can support 1066MHz,1333MHz, and 1600MHz based on DIMM and configuration.
What types of RAM are accepted by the Supermicro X10SAE?
The SupermicroX10SLL-F supports DDR3 with ECC UDIMM only.
What is ECC Registered Memory?
The Supermicro X10SLL-F does not support registered memory with ECC. ECC memory detects and corrects memory errors within the server environment. Registered (also called buffered) memory modules register between DRAM modules and the system's memory controller. ECC Registered Memory transfers less electrical load to your memory controller which makes it more stable and reliable.
What is Unbuffered Memory?
The Supermicro X10SLL-F supports unbuffered memory with ECC and without ECC. Unbuffered memory is memory that has no register between your DRAM and your system’s memory controller.
What is Load Reduced Memory?
The Supermicro X10SLL-F does not support load reduced DIMM (LRDIMM). Load reduced DIMM is designed with a buffer chip (or chips) to replace the register to help minimize loading, the LRDIMM increases server system memory capacity and speed.
Can I mix ECC Reg with ECC unbuffered or Non-ECC memory?
The Supermicro X10SLL-F supports the use of unbuffered memory with ECC or without ECC. Mixing unbuffered memory with ECC and non-ECC memory may cause boot failure. The use of both unbuffered and registered memory is not recommended. It is recommended to use identical memory configuration in all channels.
What is max configuration?
The Supermicro X10SLL-F allows the maximum configuration of 32 GB of 12800E or 8GB 12800U. Get your kit at Cloud Ninjas.
How many memory channels per CPU?
The Supermicro X10SLL-F has a total of 4 slots which are numbered 1 through 4. DIMM that are electrically and thermally compatible with this model are recommended.
How do I identify the start of the memory channel?
The Supermicro X10SLL-F requires that DIMM sockets only be populated based on the exact number of slots i.e., 1 through 4.
Where can I order memory for my workstation?
Order your memory at Cloud Ninjas by finding and selecting the memory package that is right for you.
How soon will my RAM arrive?
Orders placed before 8 am are set for same day processing and shipping. Delivery times vary based on carrier and location.
What is the warranty on memory for the workstation?
Cloud Ninjas offers a one-year warranty on fully tested, refurbished memory.

Select a Speed

Select a Size

Select a Speed

Select a Size

Select a Speed

Select a Size

Select a Speed

Select a Size

Filter By

ALL PRODUCTS

All products

6 products