Collection: Supermicro X10SLE-F Memory Upgrades

SupermicroX10SLE-F RAM Upgrades

Get your business moving with the Supermicro X10SLE-F by upgrading its memory and unlocking the maximum productivity your business has to offer. Designed with power and performance for multimedia communications in mind, the Supermicro X10SLE-F can be upgraded up to a maximum of 32 GB ECC DDR3 modules.

The Supermicro X10SLE-F Motherboard supports a maximum of 4 DIMM slots of DDR3 ECC Unbuffered memory. Optimize your Supermicro X10SLE-F Motherboard and make it work for you in the most powerful way by upgrading with high quality memory! Find the best RAM deal for your Supermicro X10SLE-F Motherboard by choosing your desired RAM size from the list below. For Low end systems we would recommend a 16GB upgrade kit while for a high end system we would suggest a 32GB upgrade kit.

Supermicro X10SLE-F Memory Quick Specs

# of Slots: 4 DIMMs
Max # DIMMS: 4 x 8GB
Max Size UDIMM: 32GB
Max Speed: 1600 MT/s (1866 will clock down to 1600)
DIMMS Supported: 1GB 2GB 4GB 8GB

Contact Cloud Ninjas today to help compare your options!
View the Supermicro X10SLD-HF Quick Reference.

Supermicro X10SLE-F Memory Configuration Guide

The Supermicro X10SLE-F is a Single Processor system with 4 DIMM slots. There are two memory channels each managing two DIMM slots. This system can utilize up to four 8GB UDIMMs for a maximum capacity of 32GB. Standard Voltage (1.5v) and Low Voltage (1.35v) modules are supported. You should never mix modules with different speeds. We recommend installing DIMMs with matching speeds for the best performance and reliability.

Cloud Ninjas' Supermicro X10SLE-F Workstation Memory Upgrade Tips

There are a total of four DDR3 DIMM slots on the Supermicro X10SLE-F
Supports ECC Unbuffered and Non-ECC DDR3 modules
Speeds Supported: 1066MHz, 1333MHz,1600MHz and 1866MHz. (Note: 1866MT/s will clock down to 1600MT/s)
The system supports 1GB, 2GB, 4GB and 8GB ECC DIMM or 1GB, 2GB, 4GB, 8GB Non-ECC
Voltages Supported: Standard Voltage (1.5v) and Low Voltage (1.35v)
DO NOT MIX DIFFERENT MEMORY TYPES
Maximum of 32GB ECC modules or Non-ECC Modules
There is one CPU with two channels each containing two DIMM slots
Supports Single Rank, Dual Rank, and Quad Rank memory
Think Long Term! Purchase the maximum amount that your Supermicro X10SLE-F can hold and avoid wasting time and money on modules you wont be able to use if you upgrade again.
Buy Supermicro X10SLE-F server memory today from Cloud Ninjas!

Cloud Ninjas' Supermicro X10SLE-F Workstation Questions & Answers

What memory sizes can you use for the Supermicro XX10SLE-F?
The Supermicro X10SLE-F can be upgraded using dual rank 2 GB, 4 GB, and 8 GB UDIMM. Get your upgrade kit from Cloud Ninjas.
What speeds are supported by the Supermicro X10SLE-F?
The Supermicro X10SLE-F can support 1066MHz,1333MHz, and 1600MHz based on DIMM and configuration.
What types of RAM are accepted by the Supermicro X10SLE-F?
The Supermicro X10SLE-F supports DDR3 with ECC or Non-ECC UDIMM only.
What is ECC Registered Memory?
The Supermicro X10SLE-F does not support registered memory with ECC. ECC memory detects and corrects memory errors within the server environment. Registered (also called buffered) memory modules register between DRAM modules and the system's memory controller. ECC Registered Memory transfers less electrical load to your memory controller which makes it more stable and reliable.
What is Unbuffered Memory?
The Supermicro X10SLE-F supports unbuffered memory with ECC and without ECC. Unbuffered memory is memory that has no register between your DRAM and your system’s memory controller.
What is Load Reduced Memory?
The Supermicro X10SLE-F does not support load reduced DIMM (LRDIMM). Load reduced DIMM is designed with a buffer chip (or chips) to replace the register to help minimize loading, the LRDIMM increases server system memory capacity and speed.
Can I mix ECC Reg with ECC unbuffered or Non-ECC memory?
The Supermicro X10SLE-F supports the use of unbuffered memory with ECC or without ECC. Mixing unbuffered memory with ECC and non-ECC memory may cause boot failure. The use of both unbuffered and registered memory is not recommended. It is recommended to use identical memory configuration in all channels.
What is max configuration?
The Supermicro X10SLE-F allows the maximum configuration of 32 GB of ECC UDIMM or Non-ECC UDIMM. Get your kit at Cloud Ninjas.
How many memory channels per CPU?
The Supermicro X10SLE-F has a total of 4 slots which are numbered 1 through 4. DIMM that are electrically and thermally compatible with this model are recommended.
How do I identify the start of the memory channel?
The Supermicro X10SLE-F requires that DIMM sockets only be populated based on the exact number of slots i.e., 1 through 4.
Where can I order memory for my workstation?
Order your memory at Cloud Ninjas by finding and selecting the memory package that is right for you.
How soon will my RAM arrive?
Orders placed before 8 am are set for same day processing and shipping. Delivery times vary based on carrier and location.
What is the warranty on memory for the workstation?
Cloud Ninjas offers a one-year warranty on fully tested, refurbished memory.

Select a Speed

Select a Size

Select a Speed

Select a Size

Select a Speed

Select a Size

Select a Speed

Select a Size

Filter By

ALL PRODUCTS

All products

6 products