Collection: Supermicro X10SLD-HF Memory Upgrades

Supermicro X10SLD-HF Memory Configuration Guide

The Supermicro X10SLD-HF is a Single Processor system with 4 DIMM slots. There are two memory channels each managing two DIMM slots. This system can utilize up to four 8GB UDIMMs for a maximum capacity of 32GB. Standard Voltage (1.5v) and Low Voltage (1.35v) modules are supported. You should never mix modules with different speeds. We recommend installing DIMMs with matching speeds for the best performance and reliability.  

Cloud Ninjas' Supermicro X10SLD-HF Workstation Memory Upgrade Tips

• There are a total of four DDR3 DIMM slots on the Supermicro X10SLD-HF
  
• Supports ECC Unbuffered and Non-ECC DDR3 modules
• Speeds Supported: 1066MHz, 1333MHz,1600MHz and 1866MHz. (Note: 1866MT/s will clock down to 1600MT/s)
• The system supports 1GB, 2GB, 4GB and 8GB ECC DIMM or 1GB, 2GB, 4GB, 8GB Non-ECC
  
• Voltages Supported: Standard Voltage (1.5v) and Low Voltage (1.35v)
• DO NOT MIX DIFFERENT MEMORY TYPES
• Maximum of 32GB ECC modules or Non-ECC Modules
• There is one CPU with two channels each containing two DIMM slots
• Supports Single Rank, Dual Rank, and Quad Rank memory
• Think Long Term! Purchase the maximum amount that your Supermicro X10SLD-HF can hold and avoid wasting time and money on modules you wont be able to use if you upgrade again.
• Buy Supermicro X10SLD-HF server memory today from Cloud Ninjas!

Cloud Ninjas' Supermicro X10SLD-HF Workstation Questions & Answers

1. What memory sizes can you use for the Supermicro X10SLD-HF?
   The Supermicro X10SLD-HF can be upgraded using dual rank 2 GB, 4 GB, and 8 GB UDIMM. Get your upgrade kit from Cloud Ninjas.
   
   
2. What speeds are supported by the Supermicro X10SLD-HF?
   The Supermicro X10SLD-HF can support 1066MHz,1333MHz, and 1600MHz based on DIMM and configuration.
   
   
3. What types of RAM are accepted by the Supermicro X10SLD-HF?
   The Supermicro X10SLD-HF supports DDR3 with ECC or Non-ECC UDIMM only.
   
   
4. What is ECC Registered Memory?
   The Supermicro X10SLD-HF does not support registered memory with ECC. ECC memory detects and corrects memory errors within the server environment. Registered (also called buffered) memory modules register between DRAM modules and the system's memory controller. ECC Registered Memory transfers less electrical load to your memory controller which makes it more stable and reliable.
   
   
5. What is Unbuffered Memory?
   The Supermicro X10SLD-HF supports unbuffered memory with ECC and without ECC. Unbuffered memory is memory that has no register between your DRAM and your system’s memory controller.
   
   
6. What is Load Reduced Memory?
   The Supermicro X10SLD-HF does not support load reduced DIMM (LRDIMM). Load reduced DIMM is designed with a buffer chip (or chips) to replace the register to help minimize loading, the LRDIMM increases server system memory capacity and speed.
   
   
7. Can I mix ECC Reg with ECC unbuffered or Non-ECC memory?
   The Supermicro X10SLD-HF supports the use of unbuffered memory with ECC or without ECC. Mixing unbuffered memory with ECC and non-ECC memory may cause boot failure. The use of both unbuffered and registered memory is not recommended. It is recommended to use identical memory configuration in all channels.
   
   
8. What is max configuration?
   The Supermicro X10SLD-HF allows the maximum configuration of 32 GB of ECC UDIMM or Non-ECC UDIMM. Get your kit at Cloud Ninjas.
   
   
9. How many memory channels per CPU?
   The SupermicroX10SLD-HF has a total of 4 slots which are numbered 1 through 4. DIMM that are electrically and thermally compatible with this model are recommended.
   
   
   
10. How do I identify the start of the memory channel?
    The Supermicro X10SLD-HF requires that DIMM sockets only be populated based on the exact number of slots i.e., 1 through 4.
    
    
11. Where can I order memory for my workstation?
    Order your memory at Cloud Ninjas by finding and selecting the memory package that is right for you.
    
    
12. How soon will my RAM arrive?
    Orders placed before 8 am are set for same day processing and shipping. Delivery times vary based on carrier and location.
    
    
13. What is the warranty on memory for the workstation?
    Cloud Ninjas offers a one-year warranty on fully tested, refurbished memory.