Increase and update your business infrastructure by upgrading the RAM memory of your Dell PowerEdge R930 server, and experience the difference in secure scalable speed and performance with Cloud Ninjas's selection.
Dell PowerEdge R930 Server is a quad processor system with 96 DIMM slots. There are 12 memory channels,
each managing 2 slots.
The Dell PowerEdge R930 supports ECC Registered and Load-Reduced DDR4 memory.
Different speeds can be mixed; however the modules will function at the slowest speed installed.
The Maximum speed RAM can run on the Dell PowerEdge R930 is 2400MT/s.
Keep in mind, the CPU you choose also impacts the available speeds your RAM can run.
The total number of DIMMS for the Dell PowerEdge R930 server is 96 slots.
The Dell PowerEdge R930 supports 8GB, 16GB, 32GB, DDR4 ECC Registered or 64GB, 128GB Load-Reduced memory.
RDIMMs, LRDIMMs or UDIMMs must not be mixed. The Dell PowerEdge R730, does not support ECC Unbuffered DDR4 Memory.
Buy “Dell PowerEdge R930” memory today from Cloud Ninjas!
When purchasing new memory it is best to purchase identical memory modules to what your system already has. Your current server configuration will determine the supported DIMM type and speed.
The Maximum amount of RAM the Dell PowerEdge R930 server can hold is 3TB of ECC Registered or 12TB of Load-Reduced memory.
Think Long Term! Purchase the maximum amount that your Dell PowerEdge R930 can hold and avoid wasting time and money on modules you won't be able to use if you upgrade again.
The Dell PowerEdge R930 supports maximum speed of 2400MT/s.
Cloud Ninjas's Dell PowerEdge R930 Q&A
1. What sizes can you use for the Dell PowerEdge R930 Server? The Dell PowerEdge R930 Server can be upgraded using 8GB, 16GB, 32GB, RDIMMS, and up to 128GB LRDIMMs. Get your kit at https://cloudninjas.com/.
2. What speeds are supported by the Dell PowerEdge R930 Server? The Dell PowerEdge R930 Server can support memory modules at speeds 2400MT/s.
3. What types of RAM are accepted by the Dell PowerEdge R930 Server? The Dell PowerEdge R930 Server supports ECC Registered memory and Load-Reduced.
4. What is ECC Registered Memory? The Dell PowerEdge R930 Server does support registered memory with ECC. ECC Registered Memory detects and corrects single-bit errors in memory using parity bits and a series of mathematical equations. In ECC Registered memory, Registers (also called buffers) sit between the memory module's address bus and the physical memory chips.
5. What is Unbuffered Memory? The Dell PowerEdge R930 Server does not support unbuffered memory with ECC. Unbuffered memory is memory that has no registers (also called buffers). Unbuffered memory can be ECC (for entry-level servers and workstations) or Non-ECC (for desktops and laptops).
6. What is Load Reduced Memory? The Dell PowerEdge R930 Server does support load reduced DIMM (LRDIMM). ECC Load Reduced Memory detects and corrects single-bit errors in memory using parity bits and a series of mathematical equations and reduces electrical load on the system's memory controller when compared to other types of memory modules. In ECC Load Reduced memory, Registers (also called buffers) sit between the memory module's address bus and the physical memory chips. Additional registers also sit between the Memory chips and the data bus, further reducing load on the system's memory controller in comparison to ECC registered memory.
7. Can I mix ECC Reg with ECC unbuffered or Non-ECC memory? The Dell PowerEdge R930 Server does not support the use of both unregistered and registered memory with ECC or the use of non-ECC memory. It is recommended to use identical memory configuration in all channels.
8. What is the max configuration? The Dell PowerEdge R930 Server supports the standard maximum configuration of 3TB using 96x32GB RDIMMs or 12TB using 48x128GB LRDIMMs memory. Get your kit at https://cloudninjas.com/
9. How many memory channels per CPU? The Dell PowerEdge R930 Server has 12 channels which house 2 sockets per channel with a total of 96 sockets in the quad processor configuration.
10. How do I identify the start of the memory channel? The Dell PowerEdge R930 Server, requires memory to be installed into the first white channel marked A1 for Processor 1, inserting in sequential order and then Processor 2 the first white channel marked B1.
11. Where can I order memory for my server? Order your memory at https://cloudninjas.com/ by finding and selecting the memory package that is right for you.
12. How soon will my RAM arrive?Orders placed before 8 am are set for same day processing and shipping. Delivery times vary based on carrier and location.
13. What is the warranty on memory for the server?Cloud Ninjas offers a one-year warranty on fully tested, refurbished memory.
14. Is this RAM Dell labeled or Dell branded?No. The memory shipped from Cloud Ninjas is compatible with your Dell system. However, it will not have a Dell sticker. We ship major brands such as Samsung, Hynix and Micron.
Use left/right arrows to navigate the slideshow or swipe left/right if using a mobile device
Choosing a selection results in a full page refresh.
Press the space key then arrow keys to make a selection.
Filters
The total number of DIMMS for the Dell PowerEdge R930 server is 96 slots.
The Dell PowerEdge R930 supports 8GB, 16GB, 32GB, DDR4 ECC Registered or 64GB, 128GB Load-Reduced memory.
RDIMMs, LRDIMMs or UDIMMs must not be mixed. The Dell PowerEdge R730, does not support ECC Unbuffered DDR4 Memory.
Buy “Dell PowerEdge R930” memory today from Cloud Ninjas!
The Maximum amount of RAM the Dell PowerEdge R930 server can hold is 3TB of ECC Registered or 12TB of Load-Reduced memory.
Think Long Term! Purchase the maximum amount that your Dell PowerEdge R930 can hold and avoid wasting time and money on modules you won't be able to use if you upgrade again.