HPE ProLiant DL360 Gen10 PLUS SSD Upgrades
Upgrade your enterprise storage infrastructure with high-capacity enterprise solid state drives from Cloud Ninjas, designed to deliver the highest performance, scalability, and efficiency for servers, workstations and all HPC systems.
Browse our selection of SATA, SAS, and all variants of NVMe in multiple capacities and conditions keep your business running at peak performance!
- Supported drives: SATA, SAS, NVMe
- Max Configuration: 10x 2.5" drives
- Max capacity: 153.6TB
CONTACT FOR INQUIRES:
sales@cloudninjas.com
Filters
Solid State Drives
35 Items-
Key Specs- Used Drive
- 90%+ Health
- 960GB
- 6GB/s SATA
- 2.5-inch Drive
- Gen 9 to Gen 11 HPE Servers
$777.00In Stock -
Entry Level
Key Specs- 800GB
- NVMe U.2
- New Drive
- 16GT/s Transfer Speeds
- HPE Gen9/10/10+/11 Servers
- 2.5-inch Drive
- Optional 2.5/3.5-inch Drive Tray
- PCIe 4.0
$995.00In Stock -
Workload Ready
Key Specs- 7.68TB
- NVMe U.2
- New Drive
- 16GT/s Transfer Speeds
- HPE Gen 9/10/10+/11 Servers
- 2.5-inch Drive
- Optional 2.5/3.5-inch Drive Tray
- PCIe 4.0
$6,995.00In Stock -
Maximum Uptime
Key Specs- 6.4TB
- NVMe U.2
- New Drive
- 16GT/s Transfer Speeds
- HPE Gen 9/10/10+/11 Servers
- 2.5-inch Drive
- Optional 2.5/3.5-inch Drive Tray
- PCIe 4.0
$6,995.00In Stock -
Endurance Optimized
Key Specs- 3.2TB
- NVMe U.2
- New Drive
- 16GT/s Transfer Speeds
- HPE Gen 9/10/10+/11 Servers
- 2.5-inch Drive
- Optional 2.5/3.5-inch Drive Tray
- PCIe 4.0
$3,995.00In Stock
HPE ProLiant DL360 Gen10 Plus Solid State Drive Upgrades
The HPE ProLiant DL360 Gen10 Plus is a rackmount server with configuration of 4x 3.5" SATA/SAS, 8x 2.5" SATA/SAS/NVMe, and 8x 2.5" SATA/SAS/NVMe plus 2.5" SATA/SAS/NVMe backplane solid state drives. This HPE ProLiant DL360 Gen10 Plus supports the following types of solid state drives: SATA, SAS and NVMe. The capacities supported by this server range from 120GB to 15.36TB and offers speeds of 3GB/s, 6GB/s, 12GB/s, 24GB/s or up to 16GT/s depending on the type of solid state drive. The max capacity configuration available for this server is 10x 15.36TB SATA/SAS/NVMe. It is not advisable to mix the types of drives as the server will run inconsistent due to SSD drive speeds. If you want to maximize the capabilities of the HPE ProLiant DL360 Gen10 Plus, choose one type of Solid State Drives to maintain consistency when running your server nodes.
Technical Guide
Cloud Ninjas HPE ProLiant DL360 Gen10 Plus Solid State Drive Upgrade Tips
-
There are 3 different types of SSD interfaces: SATA, SAS and NVMe.
-
There are multiple SSD capacities: 120GB, 240GB, 480GB, 800Gb, 960GB, 1.6TB, 1.92TB, 3.2TB, 3.84TB, 6.4TB, 7.68TB, 15.36TB.
-
Maximum total capacities for SATA drives is 7.68TB, 7.68TB for SAS and 15.36TB for NVMe of storage memory.
-
Speed of drives for the HPE ProLiant DL360 Gen10 Plus server range from: 3GB/s to 24GB/s for SATA, and SAS SSDs. Up to 16GT/s for NVMe SSDs. But they may clockdown depending on the type of SSD.
-
SAS Support from optional SAS HBA/RAID card or software RAID.
-
There are 3 types of HPE ProLiant DL360 Gen10 Plus chassis from a storage perspective: 4x 3.5" SATA/SAS, 8x 2.5" SATA/SAS/NVMe, 8x 2.5" SATA/SAS/NVMe plus 2x 2.5" SATA/SAS/NVMe backplane.
You can mix SSD types; however, it is advised that consumer chooses one type of SSD for the entirity of the servers SSD capabilities, in order to maintain consistency.