Increase and update your business infrastructure by upgrading the RAM memory of your HP Z800 Workstation server, and experience the difference in secure scalable speed and performance with Cloud Ninjas's selection.
HP Z800 workstation is a dual processor system with 12 DIMM slots. There are 3 memory channels,
managing each 2 slots per processor.
The HP Z800 workstation supports ECC Registered, or ECC Unbuffered DDR3 memory.
Different speeds can be mixed; however the modules will function at the slowest speed installed.
The Maximum speed RAM can run on the HP Z800 workstation is 1333MT/s.
Keep in mind, the CPU you choose also impacts the available speeds your RAM can run.
Cloud Ninjas HP Z800 workstation Memory Upgrade Tips
The total number of DIMMS for the HP Z800 workstation is 12 slots.
The HP Z800 workstation supports 4GB, 8GB, 16GB ECC Registered, or 4GB ECC Unbuffered memory.
RDIMMs, LRDIMMs or UDIMMs must not be mixed. The HP Z800 workstation, does not support Load-Reduced DDR3 Memory.
Buy “HP Z800 workstation” memory today from Cloud Ninjas!
When purchasing new memory it is best to purchase identical memory modules to what your system already has. Your current server configuration will determine the supported DIMM type and speed.
The Maximum amount of RAM the HP Z800 workstation can hold is 192GB ECC Registered, or 32GB ECC Unbuffered memory.
Think Long Term! Purchase the maximum amount that your HP Z800 workstation can hold and avoid wasting time and money on modules you won't be able to use if you upgrade again.
The HP Z800 workstation supports maximum speed of 1333MT/s.
Cloud Ninjas's HP Z800 workstation Q&A
1. What sizes can you use for the HP Z800 workstation? The HP Z800 workstation can be upgraded using 4GB, 8GB, 16GB ECC Registered, or up to 4GB ECC Unbuffered memory. Get your kit at https://cloudninjas.com/.
2. What speeds are supported by the HP Z800 workstation? The HP Z800 workstation can support memory modules at speeds 1333MT/s.
3. What types of RAM are accepted by the HP Z800 workstation? The HP Z800 workstation supports ECC Registered, and ECC Unbuffered memory.
4. What is ECC Registered Memory? The HP Z800 workstation does support registered memory with ECC. ECC Registered Memory detects and corrects single-bit errors in memory using parity bits and a series of mathematical equations. In ECC Registered memory, Registers (also called buffers) sit between the memory module's address bus and the physical memory chips.
5. What is Unbuffered Memory? The HP Z800 workstation does support unbuffered memory with ECC. Unbuffered memory is memory that has no registers (also called buffers). Unbuffered memory can be ECC (for entry-level servers and workstations) or Non-ECC (for desktops and laptops).
6. What is Load Reduced Memory? The HP Z800 workstation does not support load reduced DIMM (LRDIMM). ECC Load Reduced Memory detects and corrects single-bit errors in memory using parity bits and a series of mathematical equations and reduces electrical load on the system's memory controller when compared to other types of memory modules. In ECC Load Reduced memory, Registers (also called buffers) sit between the memory module's address bus and the physical memory chips. Additional registers also sit between the Memory chips and the data bus, further reducing load on the system's memory controller in comparison to ECC registered memory.
7. Can I mix ECC Reg with ECC unbuffered or Non-ECC memory? The HP Z800 workstation does not support the use of both unregistered and registered memory with ECC or the use of non-ECC memory. It is recommended to use identical memory configuration in all channels.
8. What is the max configuration? The HP Z800 workstation supports the standard maximum configuration of 192GB using 12x16GB RDIMMs, or 32GB using 8x4GB URDIMMs memory. Get your kit at https://cloudninjas.com/
9. How many memory channels per CPU? The HP Z800 workstation has 3 channels which house 2 sockets per processor with a total of 12 sockets in the dual processor configuration.
10. How do I identify the start of the memory channel? The HP Z800 workstation, requires memory to be installed into the first white channel marked A1 for Processor 1, inserting in sequential order and then Processor 2 the first white channel marked B1.
11. Where can I order memory for my Workstation? Order your memory at https://cloudninjas.com/ by finding and selecting the memory package that is right for you.
12. How soon will my RAM arrive?Orders placed before 8 am are set for same day processing and shipping. Delivery times vary based on carrier and location.
13. What is the warranty on memory for the workstation?Cloud Ninjas offers a one-year warranty on fully tested, refurbished memory.
14. Is this RAM HPE labeled or HPE branded?No. The memory shipped from Cloud Ninjas is compatible with your HPE system. However, it will not have a HPE sticker. We ship major brands such as Samsung, Hynix and Micron.
Use left/right arrows to navigate the slideshow or swipe left/right if using a mobile device
Choosing a selection results in a full page refresh.
Press the space key then arrow keys to make a selection.
Filters
The total number of DIMMS for the HP Z800 workstation is 12 slots.
The HP Z800 workstation supports 4GB, 8GB, 16GB ECC Registered, or 4GB ECC Unbuffered memory.
RDIMMs, LRDIMMs or UDIMMs must not be mixed. The HP Z800 workstation, does not support Load-Reduced DDR3 Memory.
Buy “HP Z800 workstation” memory today from Cloud Ninjas!
The Maximum amount of RAM the HP Z800 workstation can hold is 192GB ECC Registered, or 32GB ECC Unbuffered memory.
Think Long Term! Purchase the maximum amount that your HP Z800 workstation can hold and avoid wasting time and money on modules you won't be able to use if you upgrade again.