Gigabyte H263-S63-LAW1 Node Server Memory Upgrades
Increase and update your business infrastructure by upgrading the RAM memory of your Gigabyte H263-S63-LAW1 Node Server server, and experience the difference in secure scalable speed and performance with Cloud Ninjas's selection.
Gigabyte H263-S63-LAW1 node Server is a dual processor system with 16 DIMM slots *per Node. There are 16 memory channels,
each managing 1 slots.
The Gigabyte H263-S63-LAW1 supports ECC Registered DDR5 memory.
Different speeds can be mixed; however the modules will function at the slowest speed installed.
The Maximum speed RAM can run on the Gigabyte H263-S63-LAW1 is 5600MT/s.
Keep in mind, the CPU you choose also impacts the available speeds your RAM can run.
RDIMMs, LRDIMMs or UDIMMs must not be mixed. The Gigabyte H263-S63-LAW1, does not support ECC/Non-ECC Unbuffered DDR5 Memory.
Buy “Gigabyte H263-S63-LAW1” memory today from Cloud Ninjas!
When purchasing new memory it is best to purchase identical memory modules to what your system already has. Your current server configuration will determine the supported DIMM type and speed.
The Maximum amount of RAM the Gigabyte H263-S63-LAW1 server can hold is 2TB of ECC Registered memory per node.
Think Long Term! Purchase the maximum amount that your Gigabyte H263-S63-LAW1 can hold and avoid wasting time and money on modules you won't be able to use if you upgrade again.
The Gigabyte H263-S63-LAW1 supports maximum speed of 4800MT/s or 5600MT/s depending on how many DIMMs used per channel, and processor generation used.
Cloud Ninjas's Gigabyte H263-S63-LAW1 Q&A
1. What sizes can you use for the Gigabyte H263-S63-LAW1 Server? The Gigabyte H263-S63-LAW1 Server can be upgraded using 8GB, 16GB, 32GB, 64GB, 96GB, 128GB ECC Registered memory. Get your kit at https://cloudninjas.com/.
2. What speeds are supported by the Gigabyte H263-S63-LAW1 Server? The Gigabyte H263-S63-LAW1 Server can support memory modules at speeds of 4800MT/s or 5600MT/s depending on how many DIMMs used per channel, and processor generation used.
3. What types of RAM are accepted by the Gigabyte H263-S63-LAW1 Server? The Gigabyte H263-S63-LAW1 Server supports ECC Registered memory.
4. What is ECC Registered Memory? The Gigabyte H263-S63-LAW1 Server does support registered memory with ECC. ECC Registered Memory detects and corrects single-bit errors in memory using parity bits and a series of mathematical equations. In ECC Registered memory, Registers (also called buffers) sit between the memory module's address bus and the physical memory chips.
5. What is Unbuffered Memory? The Gigabyte H263-S63-LAW1 Server does not support unbuffered memory with ECC and Non-ECC. Unbuffered memory is memory that has no registers (also called buffers). Unbuffered memory can be ECC (for entry-level servers and workstations) or Non-ECC (for desktops and laptops).
6. What is Load Reduced Memory? The Gigabyte H263-S63-LAW1 Server does not support load reduced DIMM (LRDIMM). ECC Load Reduced Memory detects and corrects single-bit errors in memory using parity bits and a series of mathematical equations and reduces electrical load on the system's memory controller when compared to other types of memory modules. In ECC Load Reduced memory, Registers (also called buffers) sit between the memory module's address bus and the physical memory chips. Additional registers also sit between the Memory chips and the data bus, further reducing load on the system's memory controller in comparison to ECC registered memory.
7. Can I mix ECC Reg with ECC unbuffered or Non-ECC memory? The Gigabyte H263-S63-LAW1 Server does not support the use of both unregistered and registered memory with ECC or the use of non-ECC memory. It is recommended to use identical memory configuration in all channels.
8. What is the max configuration? The Gigabyte H263-S63-LAW1 Server supports the standard maximum configuration of 2TB using 16x128GB ECC Registered memory per node. Get your kit at https://cloudninjas.com/
9. How many memory channels per CPU? The Gigabyte H263-S63-LAW1 Server has 16 channels which house 1 socket per channel with a total of 16 sockets in the dual processor configuration per node.
10. How do I identify the start of the memory channel? The Gigabyte H263-S63-LAW1 Server, requires memory to be installed into the first white channel marked A1 for Processor 1, inserting in sequential order and then Processor 2 the first white channel marked B1.
11. Where can I order memory for my server? Order your memory at https://cloudninjas.com/ by finding and selecting the memory package that is right for you.
12. How soon will my RAM arrive?Orders placed before 8 am are set for same day processing and shipping. Delivery times vary based on carrier and location.
13. What is the warranty on memory for the server?Cloud Ninjas offers a one-year warranty on fully tested, refurbished memory.
14. Is this RAM Gigabyte labeled or Gigabyte branded?No. The memory shipped from Cloud Ninjas is compatible with your Gigabyte system. However, it will not have a Gigabyte sticker. We ship major brands such as Samsung, Hynix and Micron.
Use left/right arrows to navigate the slideshow or swipe left/right if using a mobile device
Choosing a selection results in a full page refresh.
Press the space key then arrow keys to make a selection.
Filters
The total number of DIMMS for the Gigabyte H263-S63-LAW1 server is 16 slots per node.
The Gigabyte H263-S63-LAW1 supports 8GB, 16GB, 32GB, 64GB, 96GB, 128GB DDR5 ECC Registered memory.
RDIMMs, LRDIMMs or UDIMMs must not be mixed. The Gigabyte H263-S63-LAW1, does not support ECC/Non-ECC Unbuffered DDR5 Memory.
Buy “Gigabyte H263-S63-LAW1” memory today from Cloud Ninjas!
The Maximum amount of RAM the Gigabyte H263-S63-LAW1 server can hold is 2TB of ECC Registered memory per node.
Think Long Term! Purchase the maximum amount that your Gigabyte H263-S63-LAW1 can hold and avoid wasting time and money on modules you won't be able to use if you upgrade again.