Collection: Dell PowerEdge 1950 RAM Memory Upgrades

PowerEdge 1950 RAM Upgrade

Upgrading your Dell PowerEdge 1950 memory is the quickest and least expensive way to improve the life of server in a matter of minutes. Installing the highest capacity memory RAM modules in each memory socket will give you optimal speed improvements.

If this server runs multiple applications at a time, the standard 1GB of memory should be upgraded to the maximum capacity that your PowerEdge Servers allows. The Dell PowerEdge 1950 has 8 (4 banks of 2) memory expansion slots. Optimize your PowerEdge 1950 Server and improve your productivity by upgrading with high-quality memory! Find the best RAM deal for your Dell PowerEdge 1950 by choosing your desired RAM size from the list below.

Dell PowerEdge 1950 Memory Specs

Number of Slots: 8
Max # of DIMMS: 8X8GB
Max Size GB: 64GB
DIMMS Supported:
512MB to 8GB
Max RAM Speed: 667MHz

Contact Cloud Ninjas today to help compare your options
View the Dell PowerEdge 1950 Technical Guide.

Dell PowerEdge 1950 Memory Configuration

The 1950 is a Dual Processor system with 4 DIMM slots per CPU. There are two memory channels per CPU. Each memory channel manages two DIMM slots. Different speeds can be mixed but the modules will function at the slowest speed installed.

Cloud Ninjas' Dell 1950 Memory Upgrade Tips

Dell's PowerEdge 1950 has a total of 8 DIMM Slots running on DDR2 memory.
The 1950 will support 256MB, 512MB, 1GB, 2GB, 4GB and 8GB Fully Buffered Modules (FBDIMMs), in matched pairs.
The Gen I and Gen II Dell PowerEdge 1950 can hold up to 32GB of memory, while the Dell PowerEdge 1950 Gen III can hold a maximum of 64GB
Think Long Term! Purchase the maximum amount that your PowerEdge 1950 can hold and avoid wasting time and money on modules you won't be able to use if you upgrade again.
Use only qualified FBDs. FBDs can be either single-ranked or dual-ranked. FBDs marked with a 1R are single-ranked and modules marked with a 2R are dual-ranked.
A minimum of two identical FBDs must be installed to boot up the system. Install eight modules to ensure optimal performance.
When populating DIMM sockets on the PowerEdge 1950, populate the lowest number first.
Memory modules must be installed in pairs of matched memory size, speed, and technology, and the total number of memory modules in the configuration must total two, four, or eight. For best system performance, all four, or eight memory modules should be identical in size, speed, and technology.
Memory sparing and memory mirroring require eight memory, and all memory modules must be of identical memory size, speed, and technology
The memory shipped from Cloud Ninjas is compatible with your Dell system. However, it will not have a Dell sticker. We ship major brands such as Samsung, Hynix and Micron.

Dell PowerEdge 1950 Memory Upgrade Video

Select a Speed

Select a Size

Select a Speed

Select a Size

Select a Speed

Select a Size

Select a Speed

Select a Size

Filter By

ALL PRODUCTS

All products

6 products

PowerEdge 1950 RAM Upgrade

Dell PowerEdge 1950 Memory Specs

Number of Slots: 8
Max # of DIMMS: 8X8GB
Max Size GB: 64GB
DIMMS Supported:
512MB to 8GB
Max RAM Speed: 667MHz

Contact Cloud Ninjas today to help compare your options
View the Dell PowerEdge 1950 Technical Guide.

Dell PowerEdge 1950 Memory Configuration

Cloud Ninjas' Dell 1950 Memory Upgrade Tips

Dell's PowerEdge 1950 has a total of 8 DIMM Slots running on DDR2 memory.
The 1950 will support 256MB, 512MB, 1GB, 2GB, 4GB and 8GB Fully Buffered Modules (FBDIMMs), in matched pairs.
The Gen I and Gen II Dell PowerEdge 1950 can hold up to 32GB of memory, while the Dell PowerEdge 1950 Gen III can hold a maximum of 64GB
Think Long Term! Purchase the maximum amount that your PowerEdge 1950 can hold and avoid wasting time and money on modules you won't be able to use if you upgrade again.
Use only qualified FBDs. FBDs can be either single-ranked or dual-ranked. FBDs marked with a 1R are single-ranked and modules marked with a 2R are dual-ranked.
A minimum of two identical FBDs must be installed to boot up the system. Install eight modules to ensure optimal performance.
When populating DIMM sockets on the PowerEdge 1950, populate the lowest number first.
Memory modules must be installed in pairs of matched memory size, speed, and technology, and the total number of memory modules in the configuration must total two, four, or eight. For best system performance, all four, or eight memory modules should be identical in size, speed, and technology.
Memory sparing and memory mirroring require eight memory, and all memory modules must be of identical memory size, speed, and technology
The memory shipped from Cloud Ninjas is compatible with your Dell system. However, it will not have a Dell sticker. We ship major brands such as Samsung, Hynix and Micron.