Increase and update your business infrastructure by upgrading the RAM memory of your Cisco UCS B200 M4 server, and experience the difference in secure scalable speed and performance with Cloud Ninjas's selection.
The Cisco UCS B200 M4 is a dual processor system with 24 DIMM slots. There are 12 memory channels,
each managing 2 slots.
The Cisco UCS B200 M4 supports ECC Registered and Load-Reduced DDR4 memory.
Different speeds can be mixed; however the modules will function at the slowest speed installed.
The Maximum speed RAM can run on the Cisco UCS B200 M4 is 2400MT/s.
Keep in mind, the CPU you choose also impacts the available speeds your RAM can run.
The total number of DIMMS for the Cisco UCS B200 M4 Server is 24 slots.
The Cisco UCS B200 M4 supports 16GB, 32GB ECC Registered or 32GB, 64GB Load-Reduced DDR4 memory.
RDIMMs, LRDIMMs or UDIMMs must not be mixed. The Cisco UCS B200 M4 supports ECC Registered and Load-Reduced DDR4 Memory.
Buy “Cisco UCS B200 M4” memory today from Cloud Ninjas!
When purchasing new memory it is best to purchase identical memory modules to what your system already has. Your current Server configuration will determine the supported DIMM type and speed.
The Maximum amount of RAM the Cisco UCS B200 M4 Server can hold is 384GB ECC Registered and Load-Reduced DDR4 memory.
Think Long Term! Purchase the maximum amount that your Cisco UCS B200 M4 can hold and avoid wasting time and money on modules you won't be able to use if you upgrade again.
The Cisco UCS B200 M4 supports maximum speeds of 1600MT/s to 2400MT/s depending on processor generation and how many DIMMs are used per channel.
Cloud Ninjas's Cisco UCS B200 M4 Q&A
1. What sizes can you use for the Cisco UCS B200 M4 Server? The Cisco UCS B200 M4 Server can be upgraded using 16GB, 32GB ECC Registered or 32GB, 64GB Load-Reduced DDR4 memory. Get your kit at https://cloudninjas.com/.
2. What speeds are supported by the Cisco UCS B200 M4 Server? The Cisco UCS B200 M4 Server can support memory modules at speeds of 1600MT/s to 2400MT/s depending on processor generation and how many DIMMs are used per channel.
3. What types of RAM are accepted by the Cisco UCS B200 M4 Server? The Cisco UCS B200 M4 Server supports ECC Registered and Load-Reduced DDR4 memory.
4. What is ECC Registered Memory? The Cisco UCS B200 M4 Server supports registered memory with ECC. ECC Registered Memory detects and corrects single-bit errors in memory using parity bits and a series of mathematical equations. In ECC Registered memory, Registers (also called buffers) sit between the memory module's address bus and the physical memory chips.
5. What is Unbuffered Memory? The Cisco UCS B200 M4 Server does not support unbuffered memory with ECC. Unbuffered memory is memory that has no registers (also called buffers). Unbuffered memory can be ECC (for entry-level servers and Servers) or Non-ECC (for desktops and laptops).
6. What is Load Reduced Memory? The Cisco UCS B200 M4 Server supports load reduced DIMM (LRDIMM). ECC Load Reduced Memory detects and corrects single-bit errors in memory using parity bits and a series of mathematical equations and reduces electrical load on the system's memory controller when compared to other types of memory modules. In ECC Load Reduced memory, Registers (also called buffers) sit between the memory module's address bus and the physical memory chips. Additional registers also sit between the Memory chips and the data bus, further reducing load on the system's memory controller in comparison to ECC registered memory.
7. Can I mix ECC Reg ECC unbuffered or Non-ECC memory? The Cisco UCS B200 M4 Server does not support the use of both unregistered and registered memory with ECC or the use of non-ECC memory. It is recommended to use identical memory configuration in all channels.
8. What is the max configuration? The Cisco UCS B200 M4 Server supports the standard maximum configuration of 768GB using 24x32GB RDIMMs or 1.5TB using 24x64GB DDR4 memory. Get your kit at https://cloudninjas.com/
9. How many memory channels per CPU? The Cisco UCS B200 M4 Server has 12 channels which house 2 sockets per channel with a total of 24 sockets in the dual processor configuration. Each processor has 6 channels, each housing 2 sockets.
10. How do I identify the start of the memory channel? The Cisco UCS B200 M4 Server, requires memory to be installed into the first white channel marked A1 for Processor 1, inserting in sequential order and then Processor 2 the first white channel marked B1.
11. Where can I order memory for my server? Order your memory at https://cloudninjas.com/ by finding and selecting the memory package that is right for you.
12. How soon will my RAM arrive?Orders placed before 8 am are set for same day processing and shipping. Delivery times vary based on carrier and location.
13. What is the warranty on memory for the server?Cloud Ninjas offers a one-year warranty on fully tested, refurbished memory.
14. Is this RAM Dell labeled or Dell branded?No. The memory shipped from Cloud Ninjas is compatible with your Cisco system. However, it will not have a Dell sticker. We ship major brands such as Samsung, Hynix and Micron.
Video Tutorial on Cisco UCS B200 M4 Server
Memory RAM Upgrades
Use left/right arrows to navigate the slideshow or swipe left/right if using a mobile device
Choosing a selection results in a full page refresh.
Press the space key then arrow keys to make a selection.
Filters
The total number of DIMMS for the Cisco UCS B200 M4 Server is 24 slots.
The Cisco UCS B200 M4 supports 16GB, 32GB ECC Registered or 32GB, 64GB Load-Reduced DDR4 memory.
RDIMMs, LRDIMMs or UDIMMs must not be mixed. The Cisco UCS B200 M4 supports ECC Registered and Load-Reduced DDR4 Memory.
Buy “Cisco UCS B200 M4” memory today from Cloud Ninjas!
The Maximum amount of RAM the Cisco UCS B200 M4 Server can hold is 384GB ECC Registered and Load-Reduced DDR4 memory.
Think Long Term! Purchase the maximum amount that your Cisco UCS B200 M4 can hold and avoid wasting time and money on modules you won't be able to use if you upgrade again.