Collection: HPE DL360p Gen8 RAM Memory Upgrades
HPE ProLiant DL360p Gen8 Memory Upgrades
Join the cutting edge with the HPE ProLiant DL360p Gen8 Server by upgrading its memory and experience its true hyper-cloud power. Designed with scalability, performance and speed for mass virtualization environments in mind, the HPE ProLiant DL360p Gen8 Server can be upgraded up to a maximum of 768GB. DIMM sizes include 2GB through 32GB. DIMM speeds include 1066MT/s through 1866MT/s. 1866 will function at 1600MT/s. There are three types of RAM: ECC Registered, Load Reduced and ECC Unbuffered.
Cloud Ninjas offers RAM upgrade kits compatible with the HPE ProLiant DL360p Gen8 Server. To find the best memory upgrade kit for your HPE ProLiant DL360p Gen8 Server, choose your preferred memory Type, Speed and Size from configurator below. We recommend ECC Reg for lower sized DIMMs and LRDIMMs for 32GB DIMMs. Both are good options. LRDIMMs offer more scalability. Speed - we recommend 1600MT/s, but 1066 or 1333 are also great options. As far as size, this depends on your application. 16GB and 32GB DIMMs are most popular.
HPE ProLiant DL360p Gen8 Memory Quick Specs
- Amount of Slots: 24 DIMMs
- Max # DIMMS: 24 x 32GB
- Max Size RDIMM: 512GB
- Max Size LRDIMM: 768GB
- Max Speed: 1600MT/s
(1866 clocks down to 1600) - DIMM Support:4GB to 32GB
Contact Cloud Ninjas today to help compare your options
View the HPE ProLiant DL360p Gen8 QuickSpecs.
HPE ProLiant DL360p Gen8 Memory Configuration Guide
The HPE ProLiant DL360P Gen8 is a 1U server with dual CPUs and 24 DIMMs slots. Memory is DDR3 architecture. Each CPU controls 12 DIMM slots and has four memory channels. Each memory channel manages three DIMM slots, which is important to note. 3 DIMMs per channel means the HPE ProLiant DL360p Gen8 is subject to the rank rule and will only support two ECC Reg quad rank modules or two unbuffered DIMMs per channel. There are three types of compatible memory: ECC Registered, Load Reduced and ECC Unbuffered. The HPE ProLiant DL360p Gen8 also supports standard (1.5V) or low voltage (1.35V) memory. You cannot mix different memory types or different voltages. Different speeds can be mixed. We do not recommend, as the modules will all operate at the slowest speed installed.
Cloud Ninjas' HPE ProLiant DL360P Gen8 Memory Upgrade Tips
- The HPE ProLiant DL360p Gen 8 server runs on DDR3 and has 24 memory slots.
- HPEE DL360p Gen8 server memory sizes supported: 2GB, 4GB, 8GB, 16GB, and 32GB memory modules.
- HPEE DL360p Gen8 server memory speeds supported: 1066MT/s, 1333MT/s, 1600MT/s and 1866MT/s. Do note: 1866 will operate at 1600MT/s.
- There are three types of compatible memory: ECC Registered (RDIMM), Load Reduced (LRDIMM) and ECC Unbuffered (server UDIMM).
- Max out to 768 GB (24 x 32GB) DDR3 ECC Load Reduced server memory.
- Max for ECC Reg = 512GB (16 x 32GB DDR3 ECC Registered server memory.
- You can only install 16 of the 32GBs for ECC Reg as all 32GBs are quad rank (4Rx4). This results in 2 DIMMs per channel due to rank rule. Watch our YouTube video for more information.
- Each CPU supports 12 DIMM slots with 4 memory channels per proc.
- There are 3 DIMMs per memory channel. Thus the issue.
- Rank rule states only 8 ranks per memory channel.
- Desktop RAM is not accepted by the ProLiant DL360p Gen8 server.
- 64GB DDR3 memory modules are not supported.
- Depending on the memory configuration and processor model, the memory speed may run up to 1600MHz DDR3 DIMMs.
- DO NOT MIX DIFFERENT MEMORY TYPES.
- Think Long Term! Purchase the maximum upgrade for your HPE ProLiant DL360p Gen8
- Buy "HPE ProLiant DL360p Gen8" memory today from Cloud Ninjas!
Cloud Ninjas' HPE ProLiant DL360p Gen8 Questions & Answers
- What sizes can you use for the HPE ProLiant DL360p Gen8 Server?
The HPE ProLiant DL360p Gen8 rackmount server can utilize DIMM sizes of 2GB, 4GB, 8GB, 16GB and 32GB DDR3 server modules. 64GB DDR3 modules are not supported.
- What memory speeds are supported by the HPE ProLiant DL360p Gen8 Server?
The HPE ProLiant DL360p Gen8 server will work with speeds of 1066MT/s, 1333MT/s, 1600MT/s, 1866MT/s. It is worth noting, that 1866 will clock down to 1600MT/s which is the fastest possible speed.
- What types of RAM are accepted by the HPE ProLiant DL360p Gen8 Server?
The HPE ProLiant DL360p Gen8 Server supports three types of DDR3 server memory. ECC Registered (RDIMM), Load Reduced (LRDIMM) and ECC Unbuffered (server UDIMM). We recommend ECC Reg for lower sized DIMMs and LRDIMMs for larger size DIMMs. We do not recommend ECC Unbuffered as they are more expensive and have less scalability.
- What is ECC Registered Server Memory? Does my DL360p Gen8 support RDIMMs?
Yes. The HPE ProLiant DL360p Gen8 Server supports ECC registered memory. ECC memory detects and corrects memory errors within the server environment. Registered (also called buffered) memory modules register between DRAM modules and the system's memory controller. ECC Registered Memory transfers less electrical load to your memory controller which makes it more stable and reliable.
- What is ECC Unbuffered Memory? Will the ProLiant DL360p Gen8 work with ECC UDIMMs?
Yes. The HPE ProLiant DL360P Gen8 Server supports ECC unbuffered memory. Unbuffered memory is memory that has no register between your DRAM and your system’s memory controller. This is the most expensive option on a price per GB scale. And this is the least scalable option. We advise seeking other alternatives.
- What is Load Reduced Memory? Is the HPEE DL360p Gen8 compatible with LRDIMMs?
Yes. The HPE ProLiant DL360p Gen8 Server does support load reduced DIMM (LRDIMM). Load reduced DIMM is designed with a buffer chip (or chips) to replace the register to help minimize loading, the LRDIMM increases server system memory capacity and speed.
- Can I mix ECC Reg with ECC unbuffered or Non-ECC memory?
No. The HPE ProLiant DL360P Gen8 Server does not support the use of both unregistered and registered memory with ECC or the use of non-ECC memory. It is recommended to use identical memory configuration in all channels.
- What is max memory configuration?
The HPE ProLiant DL360p Gen8 Server allows the maximum configuration of 512GB using 16 x 32GB ECC RDIMM and can be upgraded to 768 GB using 24 x 32GB LRDIMM. Get your kits from Cloud Ninjas.
- How many DIMMs are there per memory channels?
The HPE ProLiant DL360p Gen8 server has 24 DIMMs slots across two processors. The are 12 DIMM per CPU and 4 memory channels per CPU. Each channel supports 3 DIMMs. This is important as the DL360p Gen8 will be subject to the rank rule and is the reason only 16 x 32GB RDIMMs are installed, as opposed to 24. You can only install 2 quad rank RDIMMs per channel.
- How do I identify the start of the memory channel?
This is an excellent question. HPE has labeled and color coded the DIMM slots. White is the start of a new channel followed by two black DIMM slots. The HPE ProLiant DL360p Gen8 Server requires that DIMM sockets be populated sequentially beginning with channel A for processor 1 and then processor 2.
- Where can I order memory upgrades for my HPE DL360p Gen8 server?
Order your memory right here by finding and selecting the memory package that is right for you. Contact our ninjas if you have any questions or need an guidance.
- How soon will my RAM kit arrive?
Orders placed before 8AM CST are set for same day processing and shipping. Delivery times vary based on carrier and location. In general 2 to 3 days from date we ship.
- What is the warranty on memory for the HPE DL360p Gen8 server?
Cloud Ninjas offers a one-year warranty on fully tested, refurbished memory.
- Select a Type
- Registered
- Load Reduced
- Fully Buffered
- ECC Unbuffered
- Select a Speed
- Select a Size
- Select a Speed
- Select a Size
- Select a Speed
- Select a Size
- Select a Speed
- Select a Size
- All products
- 128GB
- 192GB
- 256GB
- 288GB
- 32GB
- 384GB
- 512GB
- 64GB
- 768GB
- 96GB
80 products
- Page 1 of 5
- Next page
HPE ProLiant DL360p Gen8 Memory Upgrades
Join the cutting edge with the HPE ProLiant DL360p Gen8 Server by upgrading its memory and experience its true hyper-cloud power. Designed with scalability, performance and speed for mass virtualization environments in mind, the HPE ProLiant DL360p Gen8 Server can be upgraded up to a maximum of 768GB. DIMM sizes include 2GB through 32GB. DIMM speeds include 1066MT/s through 1866MT/s. 1866 will function at 1600MT/s. There are three types of RAM: ECC Registered, Load Reduced and ECC Unbuffered.
Cloud Ninjas offers RAM upgrade kits compatible with the HPE ProLiant DL360p Gen8 Server. To find the best memory upgrade kit for your HPE ProLiant DL360p Gen8 Server, choose your preferred memory Type, Speed and Size from configurator below. We recommend ECC Reg for lower sized DIMMs and LRDIMMs for 32GB DIMMs. Both are good options. LRDIMMs offer more scalability. Speed - we recommend 1600MT/s, but 1066 or 1333 are also great options. As far as size, this depends on your application. 16GB and 32GB DIMMs are most popular.
HPE ProLiant DL360p Gen8 Memory Quick Specs
- Amount of Slots: 24 DIMMs
- Max # DIMMS: 24 x 32GB
- Max Size RDIMM: 512GB
- Max Size LRDIMM: 768GB
- Max Speed: 1600MT/s
(1866 clocks down to 1600) - DIMM Support:4GB to 32GB
Contact Cloud Ninjas today to help compare your options
View the HPE ProLiant DL360p Gen8 QuickSpecs.
HPE ProLiant DL360p Gen8 Memory Configuration Guide
The HPE ProLiant DL360P Gen8 is a 1U server with dual CPUs and 24 DIMMs slots. Memory is DDR3 architecture. Each CPU controls 12 DIMM slots and has four memory channels. Each memory channel manages three DIMM slots, which is important to note. 3 DIMMs per channel means the HPE ProLiant DL360p Gen8 is subject to the rank rule and will only support two ECC Reg quad rank modules or two unbuffered DIMMs per channel. There are three types of compatible memory: ECC Registered, Load Reduced and ECC Unbuffered. The HPE ProLiant DL360p Gen8 also supports standard (1.5V) or low voltage (1.35V) memory. You cannot mix different memory types or different voltages. Different speeds can be mixed. We do not recommend, as the modules will all operate at the slowest speed installed.
Cloud Ninjas' HPE ProLiant DL360P Gen8 Memory Upgrade Tips
- The HPE ProLiant DL360p Gen 8 server runs on DDR3 and has 24 memory slots.
- HPEE DL360p Gen8 server memory sizes supported: 2GB, 4GB, 8GB, 16GB, and 32GB memory modules.
- HPEE DL360p Gen8 server memory speeds supported: 1066MT/s, 1333MT/s, 1600MT/s and 1866MT/s. Do note: 1866 will operate at 1600MT/s.
- There are three types of compatible memory: ECC Registered (RDIMM), Load Reduced (LRDIMM) and ECC Unbuffered (server UDIMM).
- Max out to 768 GB (24 x 32GB) DDR3 ECC Load Reduced server memory.
- Max for ECC Reg = 512GB (16 x 32GB DDR3 ECC Registered server memory.
- You can only install 16 of the 32GBs for ECC Reg as all 32GBs are quad rank (4Rx4). This results in 2 DIMMs per channel due to rank rule. Watch our YouTube video for more information.
- Each CPU supports 12 DIMM slots with 4 memory channels per proc.
- There are 3 DIMMs per memory channel. Thus the issue.
- Rank rule states only 8 ranks per memory channel.
- Desktop RAM is not accepted by the ProLiant DL360p Gen8 server.
- 64GB DDR3 memory modules are not supported.
- Depending on the memory configuration and processor model, the memory speed may run up to 1600MHz DDR3 DIMMs.
- DO NOT MIX DIFFERENT MEMORY TYPES.
- Think Long Term! Purchase the maximum upgrade for your HPE ProLiant DL360p Gen8
- Buy "HPE ProLiant DL360p Gen8" memory today from Cloud Ninjas!
Cloud Ninjas' HPE ProLiant DL360p Gen8 Questions & Answers
- What sizes can you use for the HPE ProLiant DL360p Gen8 Server?
The HPE ProLiant DL360p Gen8 rackmount server can utilize DIMM sizes of 2GB, 4GB, 8GB, 16GB and 32GB DDR3 server modules. 64GB DDR3 modules are not supported.
- What memory speeds are supported by the HPE ProLiant DL360p Gen8 Server?
The HPE ProLiant DL360p Gen8 server will work with speeds of 1066MT/s, 1333MT/s, 1600MT/s, 1866MT/s. It is worth noting, that 1866 will clock down to 1600MT/s which is the fastest possible speed.
- What types of RAM are accepted by the HPE ProLiant DL360p Gen8 Server?
The HPE ProLiant DL360p Gen8 Server supports three types of DDR3 server memory. ECC Registered (RDIMM), Load Reduced (LRDIMM) and ECC Unbuffered (server UDIMM). We recommend ECC Reg for lower sized DIMMs and LRDIMMs for larger size DIMMs. We do not recommend ECC Unbuffered as they are more expensive and have less scalability.
- What is ECC Registered Server Memory? Does my DL360p Gen8 support RDIMMs?
Yes. The HPE ProLiant DL360p Gen8 Server supports ECC registered memory. ECC memory detects and corrects memory errors within the server environment. Registered (also called buffered) memory modules register between DRAM modules and the system's memory controller. ECC Registered Memory transfers less electrical load to your memory controller which makes it more stable and reliable.
- What is ECC Unbuffered Memory? Will the ProLiant DL360p Gen8 work with ECC UDIMMs?
Yes. The HPE ProLiant DL360P Gen8 Server supports ECC unbuffered memory. Unbuffered memory is memory that has no register between your DRAM and your system’s memory controller. This is the most expensive option on a price per GB scale. And this is the least scalable option. We advise seeking other alternatives.
- What is Load Reduced Memory? Is the HPEE DL360p Gen8 compatible with LRDIMMs?
Yes. The HPE ProLiant DL360p Gen8 Server does support load reduced DIMM (LRDIMM). Load reduced DIMM is designed with a buffer chip (or chips) to replace the register to help minimize loading, the LRDIMM increases server system memory capacity and speed.
- Can I mix ECC Reg with ECC unbuffered or Non-ECC memory?
No. The HPE ProLiant DL360P Gen8 Server does not support the use of both unregistered and registered memory with ECC or the use of non-ECC memory. It is recommended to use identical memory configuration in all channels.
- What is max memory configuration?
The HPE ProLiant DL360p Gen8 Server allows the maximum configuration of 512GB using 16 x 32GB ECC RDIMM and can be upgraded to 768 GB using 24 x 32GB LRDIMM. Get your kits from Cloud Ninjas.
- How many DIMMs are there per memory channels?
The HPE ProLiant DL360p Gen8 server has 24 DIMMs slots across two processors. The are 12 DIMM per CPU and 4 memory channels per CPU. Each channel supports 3 DIMMs. This is important as the DL360p Gen8 will be subject to the rank rule and is the reason only 16 x 32GB RDIMMs are installed, as opposed to 24. You can only install 2 quad rank RDIMMs per channel.
- How do I identify the start of the memory channel?
This is an excellent question. HPE has labeled and color coded the DIMM slots. White is the start of a new channel followed by two black DIMM slots. The HPE ProLiant DL360p Gen8 Server requires that DIMM sockets be populated sequentially beginning with channel A for processor 1 and then processor 2.
- Where can I order memory upgrades for my HPE DL360p Gen8 server?
Order your memory right here by finding and selecting the memory package that is right for you. Contact our ninjas if you have any questions or need an guidance.
- How soon will my RAM kit arrive?
Orders placed before 8AM CST are set for same day processing and shipping. Delivery times vary based on carrier and location. In general 2 to 3 days from date we ship.
- What is the warranty on memory for the HPE DL360p Gen8 server?
Cloud Ninjas offers a one-year warranty on fully tested, refurbished memory.