Collection: Dell PowerEdge M710 RAM Memory Upgrades

Cloud Ninjas' Dell PowerEdge M710 Memory Upgrade Tips

• The PowerEdge M710 supports 1GB, 2GB, 4GB, 8GB, and 16GB registered DDR3 DIMMs.
• The PowerEdge M710 can hold up to 288GB of memory (18 x 16GB registered DIMMs)
• The PowerEdge M710 supports 1333MHz single and dual rank DIMMs
• The DDR3 memory interface consists of three channels, with up to two RDIMMs or UDIMMs per channel for single-/dua- rank and up to two RDIMMs per channel for quad rank.
• Think Long Term! Purchase the maximum amount that your PowerEdge M710 can hold and avoid wasting time and money on modules you won't be able to use if you upgrade again.
• To properly configure The PowerEdge M710, install a minimum of two memory modules first.

Cloud Ninjas' Dell PowerEdge M710 Questions & Answers

1. What sizes can you use for the Dell PowerEdge M710 Server?
   The Dell PowerEdge M710 Server can be upgraded using 2 GB and 4 GB UDIMM or 2 GB, 4 GB, 8 GB, 16 GB, and 32 GB RDIMM.
   
   
2. What speeds are supported by the Dell PowerEdge M710 Server?
   The Dell PowerEdge M710 Server can support 800 MT/s, 1066 MT/s, 1333 MT/s, and 1600 MT/s in single, dual, and quad rank UDIMM and RDIMM based on memory configuration.
   
   
3. What types of RAM are accepted by the Dell PowerEdge M710 Server?
   The Dell PowerEdge M710 Server supports UDIMM and RDIMM.
   
   
4. What is ECC Registered Memory?
   The Dell PowerEdge M710 Server supports registered with ECC. ECC memory detects and corrects memory errors within the server environment. Registered (also called buffered) memory modules register between DRAM modules and the system's memory controller. ECC Registered Memory transfers less electrical load to your memory controller which makes it more stable and reliable.
   
   
5. What is Unbuffered Memory?
   The Dell PowerEdge M710 Server supports unbuffered memory with ECC. Unbuffered memory is memory that has no register between your DRAM and your system’s memory controller.
   
   
6. What is Load Reduced Memory?
   The Dell PowerEdge M710 Server does not support load reduced DIMM (LRDIMM). Load reduced DIMM is designed with a buffer chip (or chips) to replace the register to help minimize loading, the LRDIMM increases server system memory capacity and speed.  LRDIMM differs from low capacity, low voltage registered memory modules (LV RDIMM).
   
   
   
7. Can I mix ECC Reg with ECC unbuffered or Non-ECC memory?
   The Dell PowerEdge M710 Server does not support the use of both unregistered and registered memory with ECC or the use of non-ECC memory. It is recommended to use identical memory configuration in all channels.
   
   
8. What is max configuration?
   The Dell PowerEdge M710 Server allows the maximum configuration of up to 384 GB of RDIMM using twelve 32 GB DIMM (based on two processor configuration).
   Note: Standard configuration allows up to 288 GB upgrades using eighteen 16 GB DIMM. Get your 16 GB kit at https://cloudninjas.com/.
   
   
9. How many memory channels per CPU?
   The Dell PowerEdge M710 Server has three memory channels and each channel supports two UDIMM or RDIMM for single, dual rank and quad rank memory modules.
   
   
10. How do I identify the start of the memory channel?
    The Dell PowerEdge M710 Server memory must be installed beginning with the sockets with white levers.
    
    
11. Where can I order memory for my server?
    Order your memory at https://cloudninjas.com/ by finding and selecting the memory package that is right for you.
    
    
12. How soon will my RAM arrive?
    Orders placed before 8 am are set for same day processing and shipping. Delivery times vary based on carrier and location.
    
    
13. What is the warranty on memory for the server?
    Cloud Ninjas offers a one-year warranty on fully tested, refurbished memory.


14. Is this RAM Dell labeled or Dell branded?
No. The memory shipped from Cloud Ninjas is compatible with your Dell system. However, it will not have a Dell sticker. We ship major brands such as Samsung, Hynix and Micron.